Intermec CK3 Setup Guides

Below are links to the articles that will assist you in intially configuring your Intermec CK3 handheld devices.

• Set Device Name/ID:
  • https://support.panatrack.com/hc/en-us/articles/202421056-Set-Device-Name-or-ID
• Intermec Scanner - Remap the F1 and F2 Keys to UP and Down (this is important as Up and Down are used quite often in PanatrackerGP):
  • https://support.panatrack.com/hc/en-us/articles/210004463-Remap-F1-and-F2-Keys-to-Up-and-Down-on-Intermec-CK3-Series-Handhelds-

• Intermec Scanner - Wireless Setup:
  • https://support.panatrack.com/hc/en-us/articles/207563093-Intermec-Scanner-Wireless-Setup
• Configure Device to Access Internal Network Resources:
  • https://support.panatrack.com/hc/en-us/articles/202421016-Connect-Device-to-Internal-Work-Network
• Configure Backlight Settings to prevent auto-shutoff:
  • https://support.panatrack.com/hc/en-us/articles/202421026-Configure-Backlight-Settings-Prevent-Auto-Shutoff-

• Disable device sleep mode to prevent auto-shutoff:
  • https://support.panatrack.com/hc/en-us/articles/202421086-Disable-Device-Sleep-Mode-Prevent-Auto-Shutoff-