Connect Device to Internal Work Network

Handheld devices must be configured to communicate within your internal work network before they can reach the PanatrackerGP server.

Steps

Open the Start menu and select Settings > Connections.

Select WiFi. Ensure My network card Connects to is set to Work.

Tap OK. Back in the Connections menu, select the Connections icon.

Navigate to the Advanced tab and tap Select Networks.

Ensure both drop-downs are set to My Work Network.

• Related Articles

• Intermec CK3 Setup Guides

  Complete these setup tasks when initially configuring your Intermec CK3 handheld devices. Set Device Name/ID Remap F1 and F2 Keys to Up and Down — Up and Down are used frequently in PanatrackerGP Intermec Scanner Wireless Setup Connect Device to ...

• Device Setup

  The Device Setup page allows you to manage all handheld devices that connect to your PanatrackerGP portal. Access Device Setup from the Panatracker portal under Configure > Device Setup. Device Setup Features On the Device Setup page, the current ...

• Windows Embedded Handheld PGP Setup and Connectivity Troubleshooting guide

  Download the setup guide for instructions on connecting your Windows Embedded Handheld device to your internal network. These steps must be completed before installing PanatrackerGP.

• Initial Configuration for a Honeywell CK65 Device

  Download the attached configuration guide for step-by-step instructions on setting up your Honeywell CK65 device for use with PanatrackerGP.

• Wireless Network Requirements

  PanatrackerGP requires real-time data access. Because of this, the mobile computers with embedded barcode scanners need to connect to your wireless network. The mobile computers typically connect to a standard WiFi network following a 802.11a/b/g ...