Intermec scanners cannot scan my barcode

Intermec scanners cannot scan my barcode

Some barcode symbologies are not enabled by default on Intermec scanners. Enable the required symbology to resolve scanning issues.

Steps

  1. Press the Windows icon and select Settings.
  2. Select the System folder.
  3. Select Enterprise Settings.
  4. Tap Data Collection > Internal Scanner > Symbologies.
  5. Locate your desired symbology and check the box to enable it.

The change takes effect immediately in PanatrackerGP. Use the barcode test panel to confirm.

    • Related Articles

    • How to read a specific bar code that is surrounded by other nearby barcodes using Intermec Mobile Computers

      By default, the Intermec scanner reads a barcode as soon as it appears in the imager's field of view. This works well in most situations, but when multiple barcodes are closely positioned, the scanner may grab the wrong one. Enabling Center Decoding ...

    • How to read a specific bar code that is surrounded by other nearby barcodes using Intermec Mobile Computers

      By default, the Intermec scanner reads a barcode as soon as it appears in the imager's field of view. This works well in most situations, but when multiple barcodes are closely positioned, the scanner may grab the wrong one. Enabling Center Decoding ...

    • Picklist Mode-Zebra Scanners

      Picklist mode lets you selectively scan a specific barcode when multiple barcodes are in the scanner's field of view. This is useful for labels that contain multiple barcodes in the same area. Applies to: Zebra TC20, TC52, TC72, MC3300, MC9300 Enable ...

    • Log in to PanatrackerGP using a barcode

      PanatrackerGP can be configured to allow users to log in with a barcode scan. This requires modifications to the Composite Code XML settings in the Panatracker Portal as well as the generation of specific barcodes. Updating the Composite Code XML in ...

    • Log in to PanatrackerGP using a barcode

      PanatrackerGP can be configured to allow users to log in with a barcode scan. This requires modifications to the Composite Code XML settings in the Panatracker Portal as well as the generation of specific barcodes. Updating the Composite Code XML in ...