Intermec Scanner Wireless Setup

Intermec Scanner Wireless Setup

Basic wireless configuration for an Intermec scanner. Refer to the manufacturer's device manual for advanced setup options.

Configure the Wireless Radio

  1. Open the Start menu.
  2. Select Settings > System > Intermec Settings (or Enterprise Settings).
  3. Select Communications > 802.11 Radio.
  4. Ensure Radio Enabled is set to On. If not, select it, check the box, and tap OK.
  5. Ensure Security Choice is set to Funk Security. If not, select it, check the radio button, and tap OK.
  6. Select Funk Security.
  7. Ensure Active Profile is set to Profile 1. If not, select it, check the radio button, and tap OK.
  8. Select Profile 1.
  9. Enter a Profile Label (any name) and the SSID of your wireless network.
  10. Scroll down to Power Mode and select CAM.
  11. Select the correct Association (most networks use WPA2).
  12. Enter your Pre-Shared Key (Wi-Fi password).

Verify the Connection

  1. Open the Start menu.
  2. Select ISpyWiFi.
  3. Confirm that an IP address is displayed.

    • Related Articles

    • Intermec CK3 Setup Guides

      Complete these setup tasks when initially configuring your Intermec CK3 handheld devices. Set Device Name/ID Remap F1 and F2 Keys to Up and Down — Up and Down are used frequently in PanatrackerGP Intermec Scanner Wireless Setup Connect Device to ...

    • Intermec scanners cannot scan my barcode

      Some barcode symbologies are not enabled by default on Intermec scanners. Enable the required symbology to resolve scanning issues. Steps Press the Windows icon and select Settings. Select the System folder. Select Enterprise Settings. Tap Data ...

    • Windows Embedded Handheld PGP Setup and Connectivity Troubleshooting guide

      Download the setup guide for instructions on connecting your Windows Embedded Handheld device to your internal network. These steps must be completed before installing PanatrackerGP.

    • Wireless Network Requirements

      PanatrackerGP requires real-time data access. Because of this, the mobile computers with embedded barcode scanners need to connect to your wireless network. The mobile computers typically connect to a standard WiFi network following a 802.11a/b/g ...

    • How to read a specific bar code that is surrounded by other nearby barcodes using Intermec Mobile Computers

      By default, the Intermec scanner reads a barcode as soon as it appears in the imager's field of view. This works well in most situations, but when multiple barcodes are closely positioned, the scanner may grab the wrong one. Enabling Center Decoding ...