Intermec CK3 Setup Guides

Intermec CK3 Setup Guides

Complete these setup tasks when initially configuring your Intermec CK3 handheld devices.

  • Set Device Name/ID
  • Remap F1 and F2 Keys to Up and Down — Up and Down are used frequently in PanatrackerGP
  • Intermec Scanner Wireless Setup
  • Connect Device to Internal Work Network
  • Configure Backlight Settings (Prevent Auto-Shutoff)
  • Disable Device Sleep Mode (Prevent Auto-Shutoff)

    • Related Articles

    • Intermec Scanner Wireless Setup

      Basic wireless configuration for an Intermec scanner. Refer to the manufacturer's device manual for advanced setup options. Configure the Wireless Radio Open the Start menu. Select Settings > System > Intermec Settings (or Enterprise Settings). ...

    • Windows Embedded Handheld PGP Setup and Connectivity Troubleshooting guide

      Download the setup guide for instructions on connecting your Windows Embedded Handheld device to your internal network. These steps must be completed before installing PanatrackerGP.

    • Device Setup

      The Device Setup page allows you to manage all handheld devices that connect to your PanatrackerGP portal. Access Device Setup from the Panatracker portal under Configure > Device Setup. Device Setup Features On the Device Setup page, the current ...

    • Intermec scanners cannot scan my barcode

      Some barcode symbologies are not enabled by default on Intermec scanners. Enable the required symbology to resolve scanning issues. Steps Press the Windows icon and select Settings. Select the System folder. Select Enterprise Settings. Tap Data ...

    • GP Manufacturing Setup

      To use transactions for GP Manufacturing, a .cnk file needs to be installed and additional configuration completed within GP. GP Manufacturing requires a dedicated desktop with GP open to process transactions. Install Instructions Open and run ...