Trailing spaces embedded in barcode
To trim trailing spaces from scanned item codes, configure the following settings on the PanatrackerGP portal.
Configuration Steps
-
Navigate to System Settings > Barcode Control on the portal.
-
Configure the following settings:
- Enable Regex Features — Set to TRUE
- Data Pattern Item Field — Enter (.*\S)[ ]*$
-
Restart the handhelds to accept the above change.
-
Confirm that the trailing spaces are removed in the relevant transactions.
Using Regex for Other Fields
Similar regex patterns can be used to parse or trim data from other fields. The pattern (.*\S)[ ]*$ captures all non-whitespace characters and removes any trailing spaces, ensuring clean data entry when scanning barcodes that may contain embedded whitespace.
Related Articles
Barcode read failed. Result: A0000023
Symptom "Barcode read failed. Result: A0000023" error message appears on the handheld. Cause The error is caused by a handheld application named DataWedge conflicting with PanatrackerGP. Solution Disable DataWedge via Settings Open the Start Menu on ...
Intermec scanners cannot scan my barcode
Some barcode symbologies are not enabled by default on Intermec scanners. Enable the required symbology to resolve scanning issues. Steps Press the Windows icon and select Settings. Select the System folder. Select Enterprise Settings. Tap Data ...
Log in to PanatrackerGP using a barcode
PanatrackerGP can be configured to allow users to log in with a barcode scan. This requires modifications to the Composite Code XML settings in the Panatracker Portal as well as the generation of specific barcodes. Updating the Composite Code XML in ...
What's the life cycle for Windows Embedded Hand Held devices?
Microsoft ended support for Windows Embedded Handheld 6.5 (WEHH 6.5) in January 2020. However, many organizations continue to use these devices, and Panatrack continues to support PanatrackerGP on this platform. Panatrack Support Commitment Panatrack ...
Windows Embedded Handheld PGP Setup and Connectivity Troubleshooting guide
Download the setup guide for instructions on connecting your Windows Embedded Handheld device to your internal network. These steps must be completed before installing PanatrackerGP.