Honeywell/Intermec Android Device - Cutting Off Last Digit (Check Digit) Of A UPC Barcode

Honeywell/Intermec Android Device - Cutting Off Last Digit (Check Digit) Of A UPC Barcode

If the last digit (check digit) of a UPC barcode is missing after scanning, the Send Check Digit option needs to be enabled.

Steps

  1. From the home screen, tap the Launcher icon.
  2. In the Apps tab, locate and tap Settings.
  3. Tap Scanning > Internal Scanner > Default Profile.
  4. The Symbology Settings option is now enabled.
  5. Scroll through the symbology list, ensure the checkbox for your symbology is selected, and tap the symbology name.
  6. Check the Send Check Digit box.
  7. Press the Back button to exit the scanning configuration.

    • Related Articles

    • Android Configuration

      Download the attached Android configuration guide for step-by-step device setup instructions.

    • INIT error on Android device

      This error typically appears as "INIT ERROR Version is not in the proper format." Follow these steps to resolve it. Steps Log out and fully close the PanatrackerGP application on the device. Log in to your PanatrackerGP Portal and navigate to the ...

    • Intermec scanners cannot scan my barcode

      Some barcode symbologies are not enabled by default on Intermec scanners. Enable the required symbology to resolve scanning issues. Steps Press the Windows icon and select Settings. Select the System folder. Select Enterprise Settings. Tap Data ...

    • Device Setup

      The Device Setup page allows you to manage all handheld devices that connect to your PanatrackerGP portal. Access Device Setup from the Panatracker portal under Configure > Device Setup. Device Setup Features On the Device Setup page, the current ...

    • Initial Configuration for a Honeywell CK65 Device

      Download the attached configuration guide for step-by-step instructions on setting up your Honeywell CK65 device for use with PanatrackerGP.