Install PanatrackerGP on Android Handheld

Install PanatrackerGP on Android Handheld

Install the PanatrackerGP Android application on a handheld device using the QR code from your portal.

Prerequisite: An integrated barcode scanner or a QR scanning application.

Download and Install

  1. Navigate to the Device Setup page on the PanatrackerGP portal.
  2. Scroll to the bottom and click Android for PanatrackerGP to reveal the QR code.
  3. If the device does not have an integrated barcode scanner, open the camera app.
  4. Scan the QR code to download the APK file. The device must be on a network that can communicate with the PanatrackerGP portal.
  5. Accept and open the downloaded file if prompted.
  6. If the device requests permission to install, follow the prompts and enable downloads from this source.
  7. Tap Install to begin installation.
  8. Once complete, tap Open to launch PanatrackerGP.

Configure the Device

  1. Enter the following information when prompted:
    • Device Name — A unique name for the device, typically based on location (e.g., "WHS1" for Warehouse 1 or "SR1" for Stock Room 1).
    • Portal Address — The address shown at the bottom of the Device Setup page, or rescan the same QR code used to download the installer.
    • Path — Leave blank.
  2. Tap OK or press Enter.

Activate on the Portal

  1. Once the login screen appears on the device, refresh the Device Setup page on the portal.
  2. Locate the newly installed device and click Edit.
  3. In the popup, check the Active checkbox.

The device is now ready for use.

    • Related Articles

    • Android Configuration

      Download the attached Android configuration guide for step-by-step device setup instructions.

    • Implementing PanatrackerGP-System Requirements

      Verify your environment meets these requirements before installing PanatrackerGP. Installation Components PanatrackerGP requires three installation components: SQL Server login account Intranet website using Microsoft IIS Client app on supported ...

    • INIT error on Android device

      This error typically appears as "INIT ERROR Version is not in the proper format." Follow these steps to resolve it. Steps Log out and fully close the PanatrackerGP application on the device. Log in to your PanatrackerGP Portal and navigate to the ...

    • Install Splashtop SOS

      Splashtop SOS enables Panatrack support to remotely access your handheld device for troubleshooting. Choose one of the two installation methods below. Install from Google Play Store If you have a Google Play account configured on the device: Open the ...

    • PanatrackerGP Security questions

      Here are some common security-related questions about PanatrackerGP architecture and configuration. "How does PanatrackerGP handle data flows?" PanatrackerGP exists in two parts. The first part is a website hosted on a Windows server using Internet ...