Remap F1 and F2 Keys to Up and Down on Intermec CK3 Series Handhelds.

Remap F1 and F2 Keys to Up and Down on Intermec CK3 Series Handhelds.

Remap the F1 and F2 keys to Up and Down for easier navigation in PanatrackerGP. You can use these same steps to remap any key to another value.

Install Keyboard Remapper

  1. On the handheld, open Internet Explorer.
  2. Navigate to http://bit.ly/intkbrup.
  3. Accept the download. Make sure Open file after download is checked.
  4. The installer starts — accept all defaults.

Remap the Keys

  1. Open the Start menu and navigate to Settings > System > Keyboard Remapper.
  2. In the Physical Key drop-down, select \<F1> Key.
  3. In the Key Value drop-down, select \<Up> (near the bottom of the list).
  4. Click Add Key Definition.
  5. In the Physical Key drop-down, select \<F2> Key.
  6. In the Key Value drop-down, select \<Down> (near the bottom of the list).
  7. Click Add Key Definition.

    • Related Articles

    • Intermec CK3 Setup Guides

      Complete these setup tasks when initially configuring your Intermec CK3 handheld devices. Set Device Name/ID Remap F1 and F2 Keys to Up and Down — Up and Down are used frequently in PanatrackerGP Intermec Scanner Wireless Setup Connect Device to ...

    • Intermec Scanner Wireless Setup

      Basic wireless configuration for an Intermec scanner. Refer to the manufacturer's device manual for advanced setup options. Configure the Wireless Radio Open the Start menu. Select Settings > System > Intermec Settings (or Enterprise Settings). ...

    • MC3300X Program Keys for Special Character & Lookup List

      Use Key Programmer on the Zebra MC3300X to assign special characters or lookup list navigation to physical keys. Program a Special Character Key Open Android Settings. Scroll down to Key Programmer. Key Programmer option in Android Settings In the ...

    • Intermec scanners cannot scan my barcode

      Some barcode symbologies are not enabled by default on Intermec scanners. Enable the required symbology to resolve scanning issues. Steps Press the Windows icon and select Settings. Select the System folder. Select Enterprise Settings. Tap Data ...

    • Why does the web portal show the same IP address for my handhelds?

      Cause When multiple handhelds show the same IP address in the PanatrackerGP web portal, they are likely connecting through a Network Address Translation (NAT) device or proxy server. Common scenarios include: Handhelds connecting through a wireless ...